#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

if ARCH_CHIP_IMX6

menu "iMX.6 Chip Selection"

choice
	prompt "iMX.6 Core Configuration"
	default ARCH_CHIP_IMX6_6QUAD

config ARCH_CHIP_IMX6_6SOLOLITE
	bool "i.MX 6SoloLite"
	select ARMV7A_HAVE_GICv2
	select ARMV7A_HAVE_GTM
	select ARMV7A_HAVE_PTM

config ARCH_CHIP_IMX6_6SOLO
	bool "i.MX 6Solo"
	select ARMV7A_HAVE_GICv2
	select ARMV7A_HAVE_GTM
	select ARMV7A_HAVE_PTM

config ARCH_CHIP_IMX6_6DUALLITE
	bool "i.MX 6DualLite"
	select ARCH_HAVE_MULTICPU
	select ARMV7A_HAVE_GICv2
	select ARMV7A_HAVE_GTM
	select ARMV7A_HAVE_PTM

config ARCH_CHIP_IMX6_6DUAL
	bool "i.MX 6Dual"
	select ARCH_HAVE_MULTICPU
	select ARMV7A_HAVE_GICv2
	select ARMV7A_HAVE_GTM
	select ARMV7A_HAVE_PTM

config ARCH_CHIP_IMX6_6QUAD
	bool "i.MX 6Quad"
	select ARCH_HAVE_MULTICPU
	select ARMV7A_HAVE_GICv2
	select ARMV7A_HAVE_GTM
	select ARMV7A_HAVE_PTM

endchoice # iMX.6 Chip Selection

config IMX6_HAVE_HDCP
	bool "HDCP enabled"
	default n
	---help---
		HDCP - High-bandwidth Digital Content Protection

endmenu # "iMX.6 Chip Selection"

config IMX6_ECSPI
	bool
	default n

menu "iMX.6 Peripheral Selection"

config IMX6_ECSPI1
	bool "ECSPI1"
	default n
	select IMX6_ECSPI

config IMX6_ECSPI2
	bool "ECSPI2"
	default n
	select IMX6_ECSPI

config IMX6_ECSPI3
	bool "ECSPI3"
	default n
	select IMX6_ECSPI

config IMX6_ECSPI4
	bool "ECSPI4"
	default n
	select IMX6_ECSPI

config IMX6_ECSPI5
	bool "ECSPI5"
	default n
	select IMX6_ECSPI

config IMX6_UART1
	bool "UART1"
	default n
	select UART1_SERIALDRIVER

config IMX6_UART2
	bool "UART2"
	default n
	select UART2_SERIALDRIVER

config IMX6_UART3
	bool "UART3"
	default n
	select UART3_SERIALDRIVER

config IMX6_UART4
	bool "UART4"
	default n
	select UART4_SERIALDRIVER

config IMX6_UART5
	bool "UART5"
	default n
	select UART5_SERIALDRIVER

config IMX6_SPI1
	bool "SPI1"
	default n
	select SPI

config IMX6_SPI2
	bool "SPI2"
	default n
	select SPI

endmenu # iMX Peripheral Selection

config IMX_DDR_SIZE
	int "Installed DRAM size (bytes)"
	default 268435456

choice
	prompt "i.MX6 Boot Configuration"
	default IMX6_BOOT_SDRAM
	---help---
		The startup code needs to know if the code is running from internal SRAM,
		external SRAM, or CS0-3 in order to initialize properly.  Note that the
		boot device is not specified for cases where the code is copied into
		RAM.

config IMX6_BOOT_OCRAM
	bool "Running from internal OCRAM"
	select BOOT_RUNFROMISRAM

config IMX6_BOOT_SDRAM
	bool "Running from external SDRAM"
	select BOOT_RUNFROMSDRAM

config IMX6_BOOT_NOR
	bool "Running from external NOR FLASH"
	select BOOT_RUNFROMFLASH

config IMX6_BOOT_SRAM
	bool "Running from external SRAM"
	select BOOT_RUNFROMEXTSRAM

endchoice # i.MX6 Boot Configuration
endif # ARCH_CHIP_IMX6
